Skip to content

MHC Kenworth to Open Green Dealership In Oklahoma City

MHC Kenworth will officially unveil the second largest, and most environmentally friendly, dealership in its network on Thursday in Oklahoma City.

For over two decades, MHC has had a strong presence in the Oklahoma City area. Ground breaking on the new dealership began in December 2009 with a list of green initiatives and architectural advances. The facility will almost triple MHC’s footprint, said Vice President Dave Douglas. The dealership will also feature 24/7 service.

When designing the building, MHC used green technology to help in heating and cooling the new facility. Before the building began, almost 70 wells were drilled below the foundation building. Through geo-thermal technology, water is pumped in and out of these wells to heat and cool the parts showroom and offices. An additional heat source for the building is derived from the engine oil collected when the trucks are in for preventive maintenance service. The oil is stored and then recycled to heat the 44 body shop and service bays, and the 31,030-square-foot parts warehouse.

Energy-saving technology was used in the building. To reduce the amount of electricity consumed, motion detectors trigger the lights to turn on only when someone is in the room. In addition, translucent hollow-core overhead doors were installed in both the body and service departments. These doors allow natural light into the building without affecting the temperature of the service bays. To further reduce energy consumption, the lights in the line and body shop are controlled by photocells, and only turn on when there is insufficient lighting.

Printer Friendly Version
Email This Story
RSS
Bookmark and Share

Dealers: Related News

5/25/2011 – MHC Kenworth to Open Green Dealership In Oklahoma City

MHC Kenworth will officially unveil the second largest, and most environmentally friendly, dealership in its network on Thursday in Oklahoma City….
More

5/24/2011 – PacLease Adds Four New Locations

Paccar Leasing Company continues to expand its franchise network in North America with the addition of four locations in the United States….
More

5/19/2011 – Penske Expands Service Offerings in Temecula, Calif.

Penske Truck Leasing opened a new 16,000-square-foot building in Temecula, Calif….
More

5/16/2011 – Volvo Trucks Recognizes Top North American Parts Dealer of 2010

Volvo Trucks named its top North American Parts Dealer of 2010, Westfall Odell Truck Sales of Kansas City, Mo….
More

5/13/2011 – Mitsubishi Fuso Announces Dealer of the Year Award Winners

Mitsubishi Fuso Truck of America announced its 2010 U.S. Dealer of the Year awards….
More

5/13/2011 – Penske Opens Cheektowaga, N.Y., Location

Penske Truck Leasing has opened a new $7 million state-of-the-art facility in Cheektowaga, New York, a Buffalo suburb….
More

5/6/2011 – Wisconsin Techs Win 2011 Mack North American VISTA Competition

Mack Trucks, Inc. recently selected the winners of its second VISTA Team competition to find its top dealer service technicians….
More

5/5/2011 – Navistar Honors Southwest International Trucks

Navistar honored G. Russ Trimble, dealer principal of Southwest International Trucks in Dallas, as the International Truck Dealer of the Year at its 31st Annual Circle of Excellence awards in Napa Valley, Calif….
More

5/2/2011 – Volvo Competition Recognizes Top Technicians

Service technicians from Beaver Truck Centre in Winnepeg, Manitoba, captured first place at the 2011 Volvo Trucks North American VISTA competition….
More

4/25/2011 – Volvo Honors Dealers of the Year

Volvo Trucks North America Announced General Truck Sales of Muncie, Ind., and Expressway Trucks of Waterloo and Windsor, Ontario, 2010 Dealer of the Year in the U.S. and Canada respectively….
More

4/22/2011 – Political Analyst Charlie Cook Kicks Off First-Ever Legislative/Regulatory Session at ATD Convention

As legislative and regulatory challenges continue to grow in the nation’s capital, it’s more important than ever for commercial truck dealers to learn about issues that affect their dealerships and help shape sound policy decisions. That’s why political analyst Charlie Cook was invited to kick off the first-ever general session covering legislative and regulatory affairs issues at the ATD Convention and Expo earlier this week….
More

4/20/2011 – Ryder Opens 16th Facility in Southern California

Ryder System has opened a truck rental, leasing, and maintenance facility in Ventura, Calif….
More

4/19/2011 – Mack Names Distributor of the Year

Mack Trucks named Tri-State Truck Center of Memphis, Tenn., as its 2010 North American Distributor of the Year….
More

4/18/2011 – MK Quality Truck Sales Buys Mack Franchise

MK Quality Truck Sales of Indianapolis completed the acquisition of the Mack Trucks franchise from Central Indiana Mack Sales and Service….
More

4/18/2011 – ATD Chairman Highlights 5 Factors That Commercial Truck Retailing is Improving


After enduring a global economic downturn and diminished sales over the past couple years, the nation’s commercial truck dealers are eagerly waiting to get “back to normal” and setting their sights on the legislative and regulatory challenges ahead, said Kyle Treadway, chairman of the American Truck Dealers, in remarks Saturday to the group….
More

4/18/2011 – Richard Ryan Named Truck Dealer of the Year

Richard “Dick” Ryan of South Carolina was named the national Truck Dealer of the Year at the American Truck Dealers annual conference in Phoenix Saturday.

“I’ve had a wonderful career,” said Ryan, president and CEO of Carolina International Trucks in Columbia, S.C., who began in the business as a sales trainee for International Harvester Co. in 1972. “And I’ve really loved it.”…
More

JOIN OUR NEWSLETTER
I agree to have my personal information transfered to MailChimp ( more information )
Join over 3.000 visitors who are receiving our newsletter and learn how to optimize your blog for search engines, find free traffic, and monetize your website.
We hate spam. Your email address will not be sold or shared with anyone else.
Tax, Accounting, Consulting - Emil Estafanous, CPA, CFF, CGMA